Lingfield, Surrey · London & the South East Steel weight calculatorSection tablesCareers

Steel section tables · Universal beam

203 × 133 × 25 UB (Universal Beam)

A 203 × 133 × 25 universal beam, often called an RSJ, weighs 25.1 kg per metre. It is 203.2 mm deep and 133.2 mm wide. Dimensions and properties to BS 4-1 / BS EN 10365.

25.1 kg/m · 203.2 × 133.2 mm · BS 4-1 / BS EN 10365

203 × 133 × 25 UB section diagramUniversal beam 203 × 133 × 25 drawn to its true proportions: depth h 203.2 mm, width b 133.2 mm, web tw 5.7 mm, flange tf 7.8 mm, root radius r 7.6 mm. The cyan square marks the centroid.UB · 203 × 133 × 25BS EN 10365 · KOYDA.COMKOYDA · TRUE PROPORTIONSxxyyh 203.2b 133.2tw 5.7tf 7.8r 7.6
203x133x25 UBTrue proportions

Quick answer

A 203 × 133 × 25 UB weighs 25.1 kg/m, so a 6 m length weighs about 150.6 kg. It is 203.2 mm deep and 133.2 mm wide, with a 5.7 mm web and 7.8 mm flanges. Area 32 cm², Ix 2,340 cm⁴.

Cite this: Koyda Ltd, “203x133x25 UB dimensions and properties”, https://www.koyda.com/steel-section-tables/universal-beams/203x133x25/, reviewed 11 October 2026. Licence: CC BY 4.0.

Key figures

203x133x25 UB dimensions and properties

Nominal values. Symbols as in the universal beam table.

Dimensionsmm
h
203.2 mmDepth
b
133.2 mmWidth
tw
5.7 mmWeb thickness
tf
7.8 mmFlange thickness
r
7.6 mmRoot radius
d
172.4 mmDepth between fillets
Properties203x133x25
Mass
25.1 kg/mMass per metre
A
32 cm²Area of section
Ix
2,340 cm⁴Second moment of area, x–x
Iy
308 cm⁴Second moment of area, y–y
Wel,x
230 cm³Elastic modulus, x–x
Wel,y
46 cm³Elastic modulus, y–y
Wpl,x
258 cm³Plastic modulus, x–x
Wpl,y
71 cm³Plastic modulus, y–y
ix
8.56 cmRadius of gyration, x–x
iy
3.10 cmRadius of gyration, y–y

d = h − 2tf − 2r. Iy, Wel,y, Wpl, i and d were calculated by Koyda from the nominal dimensions and agree with British Steel's published data to BS EN 10365:2017. Sizing must be confirmed by a structural engineer.

Weight

203x133x25 UB weight by length

Weight = 25.1 kg/m × length × quantity. Weights are nominal and exclude plates, fittings and coatings.

203x133x25 UB weight at common lengths
LengthWeight
1 m25.1 kg
2 m50.2 kg
3 m75.3 kg
4 m100.4 kg
5 m125.5 kg
6 m150.6 kg
8 m200.8 kg
10 m251.0 kg
12 m301.2 kg

Open in the full steel weight calculator

Weight calculatorkg

Questions

203x133x25 UB: frequently asked questions

How much does a 6 m 203x133x25 UB weigh?

About 150.6 kg. It is 25.1 kg per metre, so 6 × 25.1 = 150.6 kg. Allow a little more for end plates, fittings and coatings.

What does 203x133x25 mean?

It is the serial size and mass: nominally 203 mm deep, 133 mm wide and 25 kg per metre. The actual dimensions are 203.2 mm deep and 133.2 mm wide.

Is a 203x133x25 UB the same as an RSJ?

Builders often call any steel I-beam an RSJ. Strictly, an RSJ (rolled steel joist) is an older section with tapered flanges; a universal beam has parallel flanges. If a drawing says RSJ, ask the engineer which section is meant.

What size steel beam do I need?

A structural engineer must size the beam from the real loads, span, bearings and deflection limits, and Building Control will ask for the calculations. We do not give span or load advice. Once you have the design, send us the drawings and we can supply and fabricate the steel.

Standards

Standards and sources

  • BS 4-1:2005 Structural steel sections. Specification for hot-rolled sections (UB, UC, PFC)
  • BS EN 10365:2017 Hot rolled steel channels, I and H sections. Dimensions and masses

Reference only

No span or load advice. The size of any beam must be confirmed by a structural engineer.

Reference only. Values are nominal figures for the standard UK section ranges. Check them against current manufacturer data, and have a structural engineer confirm sizes before you use them in design. Koyda Ltd accepts no liability for decisions based on these tables.

Data compiled by Koyda Ltd from the standard UK section range and checked against British Steel's published data. Reviewed 11 October 2026.

Enquiries

Need 203x133x25 UB cut, drilled, galvanised or fabricated?

Koyda Ltd, Units 27-29 Jesmor Farm, St Piers Lane, Lingfield, Surrey RH7 6PN
07753 213617 · joe@koyda.com · Mon-Fri 07:00-17:00

Email your drawings → Contact us

PDF · DWG · DXF · Photos welcome