Lingfield, Surrey · London & the South East Steel weight calculatorSection tablesCareers

Steel section tables · Universal beam

127 × 76 × 13 UB (Universal Beam)

A 127 × 76 × 13 universal beam, often called an RSJ, weighs 13.0 kg per metre. It is 127.0 mm deep and 76.0 mm wide. Dimensions and properties to BS 4-1 / BS EN 10365.

13.0 kg/m · 127.0 × 76.0 mm · BS 4-1 / BS EN 10365

127 × 76 × 13 UB section diagramUniversal beam 127 × 76 × 13 drawn to its true proportions: depth h 127.0 mm, width b 76.0 mm, web tw 4.0 mm, flange tf 7.6 mm, root radius r 7.6 mm. The cyan square marks the centroid.UB · 127 × 76 × 13BS EN 10365 · KOYDA.COMKOYDA · TRUE PROPORTIONSxxyyh 127.0b 76.0tw 4.0tf 7.6r 7.6
127x76x13 UBTrue proportions

Quick answer

A 127 × 76 × 13 UB weighs 13.0 kg/m, so a 6 m length weighs about 78.0 kg. It is 127.0 mm deep and 76.0 mm wide, with a 4.0 mm web and 7.6 mm flanges. Area 16.5 cm², Ix 473 cm⁴.

Cite this: Koyda Ltd, “127x76x13 UB dimensions and properties”, https://www.koyda.com/steel-section-tables/universal-beams/127x76x13/, reviewed 11 October 2026. Licence: CC BY 4.0.

Key figures

127x76x13 UB dimensions and properties

Nominal values. Symbols as in the universal beam table.

Dimensionsmm
h
127.0 mmDepth
b
76.0 mmWidth
tw
4.0 mmWeb thickness
tf
7.6 mmFlange thickness
r
7.6 mmRoot radius
d
96.6 mmDepth between fillets
Properties127x76x13
Mass
13.0 kg/mMass per metre
A
16.5 cm²Area of section
Ix
473 cm⁴Second moment of area, x–x
Iy
56 cm⁴Second moment of area, y–y
Wel,x
75 cm³Elastic modulus, x–x
Wel,y
15 cm³Elastic modulus, y–y
Wpl,x
84 cm³Plastic modulus, x–x
Wpl,y
23 cm³Plastic modulus, y–y
ix
5.35 cmRadius of gyration, x–x
iy
1.84 cmRadius of gyration, y–y

d = h − 2tf − 2r. Iy, Wel,y, Wpl, i and d were calculated by Koyda from the nominal dimensions and agree with British Steel's published data to BS EN 10365:2017. Sizing must be confirmed by a structural engineer.

Weight

127x76x13 UB weight by length

Weight = 13.0 kg/m × length × quantity. Weights are nominal and exclude plates, fittings and coatings.

127x76x13 UB weight at common lengths
LengthWeight
1 m13.0 kg
2 m26.0 kg
3 m39.0 kg
4 m52.0 kg
5 m65.0 kg
6 m78.0 kg
8 m104.0 kg
10 m130.0 kg
12 m156.0 kg

Open in the full steel weight calculator

Weight calculatorkg

Questions

127x76x13 UB: frequently asked questions

How much does a 6 m 127x76x13 UB weigh?

About 78.0 kg. It is 13.0 kg per metre, so 6 × 13.0 = 78.0 kg. Allow a little more for end plates, fittings and coatings.

What does 127x76x13 mean?

It is the serial size and mass: nominally 127 mm deep, 76 mm wide and 13 kg per metre. The actual dimensions are 127.0 mm deep and 76.0 mm wide.

Is a 127x76x13 UB the same as an RSJ?

Builders often call any steel I-beam an RSJ. Strictly, an RSJ (rolled steel joist) is an older section with tapered flanges; a universal beam has parallel flanges. If a drawing says RSJ, ask the engineer which section is meant.

What size steel beam do I need?

A structural engineer must size the beam from the real loads, span, bearings and deflection limits, and Building Control will ask for the calculations. We do not give span or load advice. Once you have the design, send us the drawings and we can supply and fabricate the steel.

Standards

Standards and sources

  • BS 4-1:2005 Structural steel sections. Specification for hot-rolled sections (UB, UC, PFC)
  • BS EN 10365:2017 Hot rolled steel channels, I and H sections. Dimensions and masses

Reference only

No span or load advice. The size of any beam must be confirmed by a structural engineer.

Reference only. Values are nominal figures for the standard UK section ranges. Check them against current manufacturer data, and have a structural engineer confirm sizes before you use them in design. Koyda Ltd accepts no liability for decisions based on these tables.

Data compiled by Koyda Ltd from the standard UK section range and checked against British Steel's published data. Reviewed 11 October 2026.

Enquiries

Need 127x76x13 UB cut, drilled, galvanised or fabricated?

Koyda Ltd, Units 27-29 Jesmor Farm, St Piers Lane, Lingfield, Surrey RH7 6PN
07753 213617 · joe@koyda.com · Mon-Fri 07:00-17:00

Email your drawings → Contact us

PDF · DWG · DXF · Photos welcome