Lingfield, Surrey · London & the South East Steel weight calculatorSection tablesCareers

Steel section tables · Universal beam

152 × 89 × 16 UB (Universal Beam)

A 152 × 89 × 16 universal beam, often called an RSJ, weighs 16.0 kg per metre. It is 152.4 mm deep and 88.7 mm wide. Dimensions and properties to BS 4-1 / BS EN 10365.

16.0 kg/m · 152.4 × 88.7 mm · BS 4-1 / BS EN 10365

152 × 89 × 16 UB section diagramUniversal beam 152 × 89 × 16 drawn to its true proportions: depth h 152.4 mm, width b 88.7 mm, web tw 4.5 mm, flange tf 7.7 mm, root radius r 7.6 mm. The cyan square marks the centroid.UB · 152 × 89 × 16BS EN 10365 · KOYDA.COMKOYDA · TRUE PROPORTIONSxxyyh 152.4b 88.7tw 4.5tf 7.7r 7.6
152x89x16 UBTrue proportions

Quick answer

A 152 × 89 × 16 UB weighs 16.0 kg/m, so a 6 m length weighs about 96.0 kg. It is 152.4 mm deep and 88.7 mm wide, with a 4.5 mm web and 7.7 mm flanges. Area 20.3 cm², Ix 834 cm⁴.

Cite this: Koyda Ltd, “152x89x16 UB dimensions and properties”, https://www.koyda.com/steel-section-tables/universal-beams/152x89x16/, reviewed 11 October 2026. Licence: CC BY 4.0.

Key figures

152x89x16 UB dimensions and properties

Nominal values. Symbols as in the universal beam table.

Dimensionsmm
h
152.4 mmDepth
b
88.7 mmWidth
tw
4.5 mmWeb thickness
tf
7.7 mmFlange thickness
r
7.6 mmRoot radius
d
121.8 mmDepth between fillets
Properties152x89x16
Mass
16.0 kg/mMass per metre
A
20.3 cm²Area of section
Ix
834 cm⁴Second moment of area, x–x
Iy
90 cm⁴Second moment of area, y–y
Wel,x
109 cm³Elastic modulus, x–x
Wel,y
20 cm³Elastic modulus, y–y
Wpl,x
123 cm³Plastic modulus, x–x
Wpl,y
31 cm³Plastic modulus, y–y
ix
6.41 cmRadius of gyration, x–x
iy
2.10 cmRadius of gyration, y–y

d = h − 2tf − 2r. Iy, Wel,y, Wpl, i and d were calculated by Koyda from the nominal dimensions and agree with British Steel's published data to BS EN 10365:2017. Sizing must be confirmed by a structural engineer.

Weight

152x89x16 UB weight by length

Weight = 16.0 kg/m × length × quantity. Weights are nominal and exclude plates, fittings and coatings.

152x89x16 UB weight at common lengths
LengthWeight
1 m16.0 kg
2 m32.0 kg
3 m48.0 kg
4 m64.0 kg
5 m80.0 kg
6 m96.0 kg
8 m128.0 kg
10 m160.0 kg
12 m192.0 kg

Open in the full steel weight calculator

Weight calculatorkg

Questions

152x89x16 UB: frequently asked questions

How much does a 6 m 152x89x16 UB weigh?

About 96.0 kg. It is 16.0 kg per metre, so 6 × 16.0 = 96.0 kg. Allow a little more for end plates, fittings and coatings.

What does 152x89x16 mean?

It is the serial size and mass: nominally 152 mm deep, 89 mm wide and 16 kg per metre. The actual dimensions are 152.4 mm deep and 88.7 mm wide.

Is a 152x89x16 UB the same as an RSJ?

Builders often call any steel I-beam an RSJ. Strictly, an RSJ (rolled steel joist) is an older section with tapered flanges; a universal beam has parallel flanges. If a drawing says RSJ, ask the engineer which section is meant.

What size steel beam do I need?

A structural engineer must size the beam from the real loads, span, bearings and deflection limits, and Building Control will ask for the calculations. We do not give span or load advice. Once you have the design, send us the drawings and we can supply and fabricate the steel.

Standards

Standards and sources

  • BS 4-1:2005 Structural steel sections. Specification for hot-rolled sections (UB, UC, PFC)
  • BS EN 10365:2017 Hot rolled steel channels, I and H sections. Dimensions and masses

Reference only

No span or load advice. The size of any beam must be confirmed by a structural engineer.

Reference only. Values are nominal figures for the standard UK section ranges. Check them against current manufacturer data, and have a structural engineer confirm sizes before you use them in design. Koyda Ltd accepts no liability for decisions based on these tables.

Data compiled by Koyda Ltd from the standard UK section range and checked against British Steel's published data. Reviewed 11 October 2026.

Enquiries

Need 152x89x16 UB cut, drilled, galvanised or fabricated?

Koyda Ltd, Units 27-29 Jesmor Farm, St Piers Lane, Lingfield, Surrey RH7 6PN
07753 213617 · joe@koyda.com · Mon-Fri 07:00-17:00

Email your drawings → Contact us

PDF · DWG · DXF · Photos welcome