Lingfield, Surrey · London & the South East Steel weight calculatorSection tablesCareers

Steel section tables · Universal beam

254 × 146 × 37 UB (Universal Beam)

A 254 × 146 × 37 universal beam, often called an RSJ, weighs 37.0 kg per metre. It is 256.0 mm deep and 146.4 mm wide. Dimensions and properties to BS 4-1 / BS EN 10365.

37.0 kg/m · 256.0 × 146.4 mm · BS 4-1 / BS EN 10365

254 × 146 × 37 UB section diagramUniversal beam 254 × 146 × 37 drawn to its true proportions: depth h 256.0 mm, width b 146.4 mm, web tw 6.3 mm, flange tf 10.9 mm, root radius r 7.6 mm. The cyan square marks the centroid.UB · 254 × 146 × 37BS EN 10365 · KOYDA.COMKOYDA · TRUE PROPORTIONSxxyyh 256.0b 146.4tw 6.3tf 10.9r 7.6
254x146x37 UBTrue proportions

Quick answer

A 254 × 146 × 37 UB weighs 37.0 kg/m, so a 6 m length weighs about 222.0 kg. It is 256.0 mm deep and 146.4 mm wide, with a 6.3 mm web and 10.9 mm flanges. Area 47.2 cm², Ix 5,537 cm⁴.

Cite this: Koyda Ltd, “254x146x37 UB dimensions and properties”, https://www.koyda.com/steel-section-tables/universal-beams/254x146x37/, reviewed 11 October 2026. Licence: CC BY 4.0.

Key figures

254x146x37 UB dimensions and properties

Nominal values. Symbols as in the universal beam table.

Dimensionsmm
h
256.0 mmDepth
b
146.4 mmWidth
tw
6.3 mmWeb thickness
tf
10.9 mmFlange thickness
r
7.6 mmRoot radius
d
219.0 mmDepth between fillets
Properties254x146x37
Mass
37.0 kg/mMass per metre
A
47.2 cm²Area of section
Ix
5,537 cm⁴Second moment of area, x–x
Iy
571 cm⁴Second moment of area, y–y
Wel,x
433 cm³Elastic modulus, x–x
Wel,y
78 cm³Elastic modulus, y–y
Wpl,x
483 cm³Plastic modulus, x–x
Wpl,y
119 cm³Plastic modulus, y–y
ix
10.8 cmRadius of gyration, x–x
iy
3.48 cmRadius of gyration, y–y

d = h − 2tf − 2r. Iy, Wel,y, Wpl, i and d were calculated by Koyda from the nominal dimensions and agree with British Steel's published data to BS EN 10365:2017. Sizing must be confirmed by a structural engineer.

Weight

254x146x37 UB weight by length

Weight = 37.0 kg/m × length × quantity. Weights are nominal and exclude plates, fittings and coatings.

254x146x37 UB weight at common lengths
LengthWeight
1 m37.0 kg
2 m74.0 kg
3 m111.0 kg
4 m148.0 kg
5 m185.0 kg
6 m222.0 kg
8 m296.0 kg
10 m370.0 kg
12 m444.0 kg

Open in the full steel weight calculator

Weight calculatorkg

Questions

254x146x37 UB: frequently asked questions

How much does a 6 m 254x146x37 UB weigh?

About 222.0 kg. It is 37.0 kg per metre, so 6 × 37.0 = 222.0 kg. Allow a little more for end plates, fittings and coatings.

What does 254x146x37 mean?

It is the serial size and mass: nominally 254 mm deep, 146 mm wide and 37 kg per metre. The actual dimensions are 256.0 mm deep and 146.4 mm wide.

Is a 254x146x37 UB the same as an RSJ?

Builders often call any steel I-beam an RSJ. Strictly, an RSJ (rolled steel joist) is an older section with tapered flanges; a universal beam has parallel flanges. If a drawing says RSJ, ask the engineer which section is meant.

What size steel beam do I need?

A structural engineer must size the beam from the real loads, span, bearings and deflection limits, and Building Control will ask for the calculations. We do not give span or load advice. Once you have the design, send us the drawings and we can supply and fabricate the steel.

Standards

Standards and sources

  • BS 4-1:2005 Structural steel sections. Specification for hot-rolled sections (UB, UC, PFC)
  • BS EN 10365:2017 Hot rolled steel channels, I and H sections. Dimensions and masses

Reference only

No span or load advice. The size of any beam must be confirmed by a structural engineer.

Reference only. Values are nominal figures for the standard UK section ranges. Check them against current manufacturer data, and have a structural engineer confirm sizes before you use them in design. Koyda Ltd accepts no liability for decisions based on these tables.

Data compiled by Koyda Ltd from the standard UK section range and checked against British Steel's published data. Reviewed 11 October 2026.

Enquiries

Need 254x146x37 UB cut, drilled, galvanised or fabricated?

Koyda Ltd, Units 27-29 Jesmor Farm, St Piers Lane, Lingfield, Surrey RH7 6PN
07753 213617 · joe@koyda.com · Mon-Fri 07:00-17:00

Email your drawings → Contact us

PDF · DWG · DXF · Photos welcome