Lingfield, Surrey · London & the South East Steel weight calculatorSection tablesCareers

Steel section tables · Universal beam

305 × 165 × 40 UB (Universal Beam)

A 305 × 165 × 40 universal beam, often called an RSJ, weighs 40.3 kg per metre. It is 303.4 mm deep and 165.0 mm wide. Dimensions and properties to BS 4-1 / BS EN 10365.

40.3 kg/m · 303.4 × 165.0 mm · BS 4-1 / BS EN 10365

305 × 165 × 40 UB section diagramUniversal beam 305 × 165 × 40 drawn to its true proportions: depth h 303.4 mm, width b 165.0 mm, web tw 6.0 mm, flange tf 10.2 mm, root radius r 8.9 mm. The cyan square marks the centroid.UB · 305 × 165 × 40BS EN 10365 · KOYDA.COMKOYDA · TRUE PROPORTIONSxxyyh 303.4b 165.0tw 6.0tf 10.2r 8.9
305x165x40 UBTrue proportions

Quick answer

A 305 × 165 × 40 UB weighs 40.3 kg/m, so a 6 m length weighs about 241.8 kg. It is 303.4 mm deep and 165.0 mm wide, with a 6.0 mm web and 10.2 mm flanges. Area 51.3 cm², Ix 8,503 cm⁴.

Cite this: Koyda Ltd, “305x165x40 UB dimensions and properties”, https://www.koyda.com/steel-section-tables/universal-beams/305x165x40/, reviewed 11 October 2026. Licence: CC BY 4.0.

Key figures

305x165x40 UB dimensions and properties

Nominal values. Symbols as in the universal beam table.

Dimensionsmm
h
303.4 mmDepth
b
165.0 mmWidth
tw
6.0 mmWeb thickness
tf
10.2 mmFlange thickness
r
8.9 mmRoot radius
d
265.2 mmDepth between fillets
Properties305x165x40
Mass
40.3 kg/mMass per metre
A
51.3 cm²Area of section
Ix
8,503 cm⁴Second moment of area, x–x
Iy
764 cm⁴Second moment of area, y–y
Wel,x
560 cm³Elastic modulus, x–x
Wel,y
93 cm³Elastic modulus, y–y
Wpl,x
623 cm³Plastic modulus, x–x
Wpl,y
142 cm³Plastic modulus, y–y
ix
12.9 cmRadius of gyration, x–x
iy
3.86 cmRadius of gyration, y–y

d = h − 2tf − 2r. Iy, Wel,y, Wpl, i and d were calculated by Koyda from the nominal dimensions and agree with British Steel's published data to BS EN 10365:2017. Sizing must be confirmed by a structural engineer.

Weight

305x165x40 UB weight by length

Weight = 40.3 kg/m × length × quantity. Weights are nominal and exclude plates, fittings and coatings.

305x165x40 UB weight at common lengths
LengthWeight
1 m40.3 kg
2 m80.6 kg
3 m120.9 kg
4 m161.2 kg
5 m201.5 kg
6 m241.8 kg
8 m322.4 kg
10 m403.0 kg
12 m483.6 kg

Open in the full steel weight calculator

Weight calculatorkg

Questions

305x165x40 UB: frequently asked questions

How much does a 6 m 305x165x40 UB weigh?

About 241.8 kg. It is 40.3 kg per metre, so 6 × 40.3 = 241.8 kg. Allow a little more for end plates, fittings and coatings.

What does 305x165x40 mean?

It is the serial size and mass: nominally 305 mm deep, 165 mm wide and 40 kg per metre. The actual dimensions are 303.4 mm deep and 165.0 mm wide.

Is a 305x165x40 UB the same as an RSJ?

Builders often call any steel I-beam an RSJ. Strictly, an RSJ (rolled steel joist) is an older section with tapered flanges; a universal beam has parallel flanges. If a drawing says RSJ, ask the engineer which section is meant.

What size steel beam do I need?

A structural engineer must size the beam from the real loads, span, bearings and deflection limits, and Building Control will ask for the calculations. We do not give span or load advice. Once you have the design, send us the drawings and we can supply and fabricate the steel.

Standards

Standards and sources

  • BS 4-1:2005 Structural steel sections. Specification for hot-rolled sections (UB, UC, PFC)
  • BS EN 10365:2017 Hot rolled steel channels, I and H sections. Dimensions and masses

Reference only

No span or load advice. The size of any beam must be confirmed by a structural engineer.

Reference only. Values are nominal figures for the standard UK section ranges. Check them against current manufacturer data, and have a structural engineer confirm sizes before you use them in design. Koyda Ltd accepts no liability for decisions based on these tables.

Data compiled by Koyda Ltd from the standard UK section range and checked against British Steel's published data. Reviewed 11 October 2026.

Enquiries

Need 305x165x40 UB cut, drilled, galvanised or fabricated?

Koyda Ltd, Units 27-29 Jesmor Farm, St Piers Lane, Lingfield, Surrey RH7 6PN
07753 213617 · joe@koyda.com · Mon-Fri 07:00-17:00

Email your drawings → Contact us

PDF · DWG · DXF · Photos welcome