Steel section tables · Universal beam
305 × 165 × 46 UB (Universal Beam)
A 305 × 165 × 46 universal beam, often called an RSJ, weighs 46.1 kg per metre. It is 306.6 mm deep and 165.7 mm wide. Dimensions and properties to BS 4-1 / BS EN 10365.
Quick answer
A 305 × 165 × 46 UB weighs 46.1 kg/m, so a 6 m length weighs about 276.6 kg. It is 306.6 mm deep and 165.7 mm wide, with a 6.7 mm web and 11.8 mm flanges. Area 58.7 cm², Ix 9,899 cm⁴.
Cite this: Koyda Ltd, “305x165x46 UB dimensions and properties”, https://www.koyda.com/steel-section-tables/universal-beams/305x165x46/, reviewed 11 October 2026. Licence: CC BY 4.0.
Key figures
305x165x46 UB dimensions and properties
Nominal values. Symbols as in the universal beam table.
- h
- 306.6 mmDepth
- b
- 165.7 mmWidth
- tw
- 6.7 mmWeb thickness
- tf
- 11.8 mmFlange thickness
- r
- 8.9 mmRoot radius
- d
- 265.2 mmDepth between fillets
- Mass
- 46.1 kg/mMass per metre
- A
- 58.7 cm²Area of section
- Ix
- 9,899 cm⁴Second moment of area, x–x
- Iy
- 896 cm⁴Second moment of area, y–y
- Wel,x
- 646 cm³Elastic modulus, x–x
- Wel,y
- 108 cm³Elastic modulus, y–y
- Wpl,x
- 720 cm³Plastic modulus, x–x
- Wpl,y
- 166 cm³Plastic modulus, y–y
- ix
- 13.0 cmRadius of gyration, x–x
- iy
- 3.90 cmRadius of gyration, y–y
d = h − 2tf − 2r. Iy, Wel,y, Wpl, i and d were calculated by Koyda from the nominal dimensions and agree with British Steel's published data to BS EN 10365:2017. Sizing must be confirmed by a structural engineer.
Use the tables and calculator offline
Install the Koyda app: section tables, weight calculator, CSV and PDF downloads, even without signal on site.
Weight
305x165x46 UB weight by length
Weight = 46.1 kg/m × length × quantity. Weights are nominal and exclude plates, fittings and coatings.
| Length | Weight |
|---|---|
| 1 m | 46.1 kg |
| 2 m | 92.2 kg |
| 3 m | 138.3 kg |
| 4 m | 184.4 kg |
| 5 m | 230.5 kg |
| 6 m | 276.6 kg |
| 8 m | 368.8 kg |
| 10 m | 461.0 kg |
| 12 m | 553.2 kg |
Related sizes
Similar universal beams
Same serial size, 305x165
- 305 × 165 × 40 40.3 kg/m
- 305 × 165 × 46 46.1 kg/m
- 305 × 165 × 54 54.0 kg/m
All 96 universal beam sizes · S275 vs S355, and RSJ vs UB · Steel weight calculator · Beam span checker (guidance) · Paint and galvanising area
Questions
305x165x46 UB: frequently asked questions
How much does a 6 m 305x165x46 UB weigh?
About 276.6 kg. It is 46.1 kg per metre, so 6 × 46.1 = 276.6 kg. Allow a little more for end plates, fittings and coatings.
What does 305x165x46 mean?
It is the serial size and mass: nominally 305 mm deep, 165 mm wide and 46 kg per metre. The actual dimensions are 306.6 mm deep and 165.7 mm wide.
Is a 305x165x46 UB the same as an RSJ?
Builders often call any steel I-beam an RSJ. Strictly, an RSJ (rolled steel joist) is an older section with tapered flanges; a universal beam has parallel flanges. If a drawing says RSJ, ask the engineer which section is meant.
What size steel beam do I need?
A structural engineer must size the beam from the real loads, span, bearings and deflection limits, and Building Control will ask for the calculations. We do not give span or load advice. Once you have the design, send us the drawings and we can supply and fabricate the steel.
Standards
Standards and sources
- BS 4-1:2005 Structural steel sections. Specification for hot-rolled sections (UB, UC, PFC)
- BS EN 10365:2017 Hot rolled steel channels, I and H sections. Dimensions and masses
Reference only
No span or load advice. The size of any beam must be confirmed by a structural engineer.
Reference only. Values are nominal figures for the standard UK section ranges. Check them against current manufacturer data, and have a structural engineer confirm sizes before you use them in design. Koyda Ltd accepts no liability for decisions based on these tables.
Data compiled by Koyda Ltd from the standard UK section range and checked against British Steel's published data. Reviewed 11 October 2026.
Enquiries
Need 305x165x46 UB cut, drilled, galvanised or fabricated?
Koyda Ltd, Units 27-29 Jesmor Farm, St Piers Lane, Lingfield, Surrey RH7 6PN
07753 213617 · joe@koyda.com · Mon-Fri 07:00-17:00